|
|
|
|
|
|
|
| 38700 Foot Control Switch |
$19.95
|
|
|
 |
|
|
|
|
|
|
Foot Control Switch
This attachment frees your hands for easy on/off operation. To be used for all machines with a maximum power consumption of 500 W. The switch has a housing of fibreglass-reinforced nylon. The connecting cord is 57” in length and the output cord is 19.5”.No. 38700
|
|
 |
|
|
|
|
|
|
| 28050 Router Table FT300 |
$44.95
|
|
|
|
|
|
|
|
|
|
 |
|
 |
|
| Independently adjustable fence halves assure that even the profiled or machined section slides securely against the out feed part of the fence. |
|
|
|
|
|
|
|
|
|
| The professional rotary tool IB/E shown in the picture here is not included. |
|
| The table fits all MICROMOT rotary tools with 3/4" (20 mm) collars. The 11 13/16" x 7 3/32" (300 x 180 mm) table is made of die-cast aluminum and supplied with a mitre gauge. The transparent guard prevents accidental contact with the cutter and the mitre gauge slides in a machined slot. The drive unit is fitted under the table in the 3/4" (20 mm) collar adapter. The depth of the cut is adjustable by means of a knob and the cutter/drive may be tilted up to 45°. This facilitates additional profiles without having to purchase numerous cutters. The complete table is secured to the worktop by four screws. When occasionally using the unit, a plate and two clamps should suffice.
Click here for a complete list of high quality router bits.
|
|
| 28606 Micromot Drill Stand MB140/S |
$54.95
|
|
|
|
|
|
|
|
|
|
All PROXXON MICROMOT hand-tools with the 3/4" standard collar perfectly fit this drill stand. It provides the steadiness when needed and turns your rotary tool into a mini drill press, e.g. for drilling very fine holes. The drill stand even makes your rotary tool more versatile as it holds it horizontally, too, so that you can use it like a bench grinder. The drill stand keeps the tool lined up and allows you to control it easily with one hand. |
|
 |
|
|
|
|
|
|
|
|
 |
|
| The professional rotary tool IB/E shown in the picture here is not included. |
|
|
| 28132 Machine Vise MS4 |
$17.95
|
|
|
|
|
|
|
|
| The vise is made of die-cast zinc and has three machined sides. The grooved base fits perfectly the adjustable fence of either drill stand MB 140/S or bench drill machine TBM 115.
The jaws are 2" (50 mm) wide and 25/64" (10 mm) high and provide horizontal and vertical V-slots for holding round work pieces. The maximum clamping width is 1 11/32" (34 mm). The anvil top with a cast-in hole is optimal for supporting small and fine parts when drilling.
|
|
 |
|
|
|
|
|
|
| 27100 Micro Compound Table KT70 |
$97.95
|
|
|
|
|
|
|
|
|
 |
|
- Two clamps are included.
- Table of 7 7/8" x 2 3/4" with 3 t-slots.
- Hand wheels with adjustable dials, 1 revolution = 1.0 mm (25/64"), 1 division = 0.05 mm (0.002").
- Adjustable scale eases work piece positioning.
|
|
|
|
|
|
|
|
| Drill stand and rotary tool above not included. |
|
| Small and Accurate - Ideal use for Drill Stand MB 140/S and Bench Drill Press TBM115
Made of surface treated solid aluminum and fitted with adjustable dovetail slides and three T-slots manufactured to the MICROMOT standard (12 x 6 x 5 mm, approx. 15/32" x 15/64" x 13/64"). The adjustable scale eases work piece positioning. Both hand wheels have zero resettable dials with graduations indicating 1 revolution = 1.0 mm (25/64") and 1 division = 0.05 mm (0.002").
The clamps and securing bolts as shown in the picture (for the drill stand MB 140/S and bench drill machine TBM 115) are included.
Technical details: Table size 7 7/8" x 2 3/4" (200 x 70 mm). X travel 5 7/32" (134 mm) and Y travel 1 13/16" (46 mm), overall height 1 11/16" (43 mm).
|
|
| 28620 Micromot Flexishaft 110/P |
$38.95
|
|
|
|
|
|
|
|
|
With triple ball bearings and speeds up to 25,000 rpm.
|
|
|
 |
|
|
|
|
|
|
|
|
The flexishaft is shown in the picture with the Professional rotary tool IB/E and the Universal Holder UH 34. Holder and rotary tool not included. |
|
 |
|
|
Sometimes even our slim and compact designed hand-held power tools are too "bulky". This is when our highly flexible Flexishaft is the solution. It is easily to be attached to any of our rotary tools, either to our Precision Rotary Tool FBS 115/E or the Professional Rotary Tool IB/E or our lightweight Rotary Tools MICROMOT 50 and 50/E in pen style design, which will hold the flexishaft's coupling piece with the collet size 7/64'' (3.0 mm).
Two ball bearings in the turned light aluminum hand piece and one in the drive end prevent tooI bits from chattering. The highly flexible shroud and core effortlessly transmit power without heating up even when bent tightly. Anti-kink springs at the grip and drive end. The flex shaft comes with 6 MICROMOT steel collets in sizes 1/32'', 1/16'', 5/64'', 3/32'', 7/64'' and 1/8'' (1.0, 1.5, 2.0, 2.4, 3.0 and 3.2 mm). The drive shaft is 7/64'' and so fits our 7/64'' steel collet. For optimal use we recommend to fix the power tool properly, e.g. in our Universal Holders UHZ and UHV.
|
|
| 28410 Micromot Tool Clamp |
$9.25
|
|
|
|
|
|
|
|
|
 |
Whenever working free hand is difficult or dangerous, here is the solution for the stationary use of MICROMOT hand-held tools. With a tough fiberglass reinforced construction, this tool clamp perfectly fits around the body of our hand-held tools with aluminum-die cast head: professional rotary tool IB/E (38481), longneck angle grinder LW/E (38544), belt sander BSL 115/E (38536) and detail sander OZI 115/E (38520) as well as the jig saw STS 12/E (28534). |
|
| Jigsaw and vise not included. |
|
|
|
|
The tool clamp is easily clamped via two flaps in a vise (we recommend the precision machine vise FMS or precision vise with clamp FMZ). |
|
|
| 28610 Universal Holder UHZ |
$33.95
|
|
|
|
|
|
|
|
|
| With socket and clamp to quickly and securely attach to workbenches and tabletops up to 2 5/16" (60mm) thick.
The stable die cast zinc base is also provided with drilled holes in order to screw the vise permanently to the workbench.
The UHZ securely holds all MICROMOT rotary tools with 13/16" (20mm) collar.
The ball joint may be swiveled in all directions. (even down, in front of the workbench)
Weight 3.3 lb.
|
|
|
 |
|
|
Professional rotary tool IB/E not included. |
|
|
|
|
|
| 28603 Micromot Universal Holder UHV |
$33.95
|
|
|
|
|
|
|
|
| The suction cap allows rapid attachment to any smooth, nonporous surface. Simply flip the bottom lever to create the powerful vacuum with the suction cup.
The stable die cast zinc base is also provided with drilled holes in order to screw the vise permanently to the workbench.
The UHV securely holds all MICROMOT rotary tools with 13/16" (20mm) collar.
The ball joint may be swiveled in all directions. (even down, in front of the workbench)
|
|
 |
|
| Professional rotary tool IB/E not included. |
|
|
|
 |
|
|
|
| 28608 Precision Vice FMZ |
$37.95
|
|
|
|
|
|
|
|
|
|
With socket and clamp to quickly and securely attach to workbenches and tabletops up to 2 5/16" (60 mm) thick. The clamping foot provides as well two holes to screw the vise down permanently.
The swivel head rotates in all directions (even down, in front of the workbench). The precision steel jaws are supplied with vertical and horizontal V-slots for securing round work pieces, too. The 3" wide jaws (75 mm) open to a clamping width of 2 3/4" (70 mm) and are equipped with removable rubber covers to protect delicate work pieces from damage. Weight 3.5 lb.
|
|
 |
|
|
|
|
| 28602 Precision Vise FMS75 |
$37.95
|
|
|
|
|
|
|
|
|
| The suction cap allows instantaneous attachment to any smooth, non-porous and flat surface, but it may also be screwed down.
The unit is of zinc die-casting and its ball rotates in all directions (even down). The jaws measure 3" (75 mm) and have protective rubber covers to also clamp delicate work pieces securely. The jaws have vertical and horizontal V-slots for clamping round work pieces. The maximum clamping width is 2 3/4" (70 mm).
|
|
 |
|
|
|
|
|
| 28405 Micromot Angle Adapter WS90 |
$39.95
|
|
|
|
|
|
|
|
|
| This practical adapter has been developed as a separate attachment for our rotary tools FBS 115/E, IB/E and mill/drill 40 and 40/E in order to reach into spots, which were not to be reached so far.
The unit has the MICROMOT standard collar of 3/4" (20 mm) and comes with an adapter, that is fitted to any of the above named rotary tools by means of a 3/32" (2.4 mm) collet that is included, too.
|
|
 |
|
|
|
|
|
| Technical data: Transmission ratio 1:1 via a 4 ball bearing drive. Housing of fibreglass-reinforced polyamide.
The angle adapter may also be used for cutting metal profiles such as model railroad tracks. The PROXXON rubber discs with sanding pads (NO 28 982) convert your machine into an angle grinder. In order to take full advantage of this angle adapter in tight spaces, insert bits or cutters as close as possible to the chuck. All of the MICROMOT steel collets (NO 28940) fit this angle adapter.
|
|
|
| MB720 Flexible Drive Shaft |
$29.95
|
|
|
 |
|
|
|
|
 |
|
- Suitable for all Minicraft rotary tools & MB680 sensitive bench drill
- Ideal for close up & detailed work
- 800mm long
- Comes with 2.3mm collet and engraving sleeve
- Will accept 3.2mm chuck (MB1932)
|
|
|
 |
|
|
|
|
|
|
|
|
|
Shown with the MB540 Vertical Press and MB1012 High Speed Drill
|
|
| PZ541 Vertical Drill Stand |
$54.95
|
|
|
|
|
Out of stock until 07/2008 |
|
|
|
|
|
 |
|
 |
|
For use with Rotary tools from Dremel, Proxxon, Minicraft and many others. |
|
- Rack and Pinion feed handle for precise control
- Depth Gauge for repeated drilling
- Angle Index for multiple positioning
|
|
|
|
|
|
|
|
|
|
| PZ715 Machine Vise |
$17.95
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
- Precision clamping system
- Die-cast body
- For use with PZ541 Drill Stand or individually
- Maximum clamping with 45mm (1-3/4")
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
