|
|
|
|
|
|
| 37020 Micro Woodturning Lathe DB250 |
$179.95
|
|
|
 |
|
|
|
| Ideal for turning pens or doll house items such as cups, plates, pots, vases and columns. Model railroad items include power and signal posts and tanks. Doll and marionette limbs as well as thousands of classical model building items may be turned with ease. |
|
|
 |
|
|
37020 Micro Woodturning Lathe Specifications:
| Center Distance |
9.8" (250mm) |
| Swing Distance |
1.56" (40mm) |
| Tailstock Travel |
0.75" |
| Speed |
Variable 500-5,000 rpm |
| Maximum Power |
85W |
| Voltage |
110-120 V AC, 60 HZ |
| Length |
15.75" |
| Weight |
6.17 lbs. |
|
|
|
|
|
|
|
|
|
Features:
- The ball bearing spindle is tapered to accept collets and bored through at 13/32" (10 mm). It allows even serial production of small parts.
- Stable tool rest with prism for centering may be secured at any height.
- Two faceplates for bigger work pieces are included.
- ABS headstock with long life and quiet motor for more than 1,000 hours of operation.
- Stable bed made from aluminum profile.
- Tailstock is adjustable with 3/4" (20 mm) quill travel.
- Chisels not included, can be order below
|
|
|
The work pieces are also to be secured by means of collets (6 different sizes are included). Includes 6 collets 5/64", 7/64", 5/32", 15/64", 5/16" and 13/32" (2, 3, 4, 6, 8, 10 mm) and faceplates for both headstock and tailstock. |
|
 |
|
|
|
|
|
|
|
Cenreless working or faceplate work is accommodated by turning the tool rest through 90°. The work piece is fixed to the faceplate by means of normal woodscrews. |
|
 |
|
 |
|
|
| An adjustable prism with scale eases centering. |
|
 |
|
|
|
|
| At low rpms the electronic speed control even assists in semi-automatic painting process. |
|
|
| 27023 Five Piece HSS Chisel Set |
$48.95
|
|
|
|
|
|
|
|
|
| Highest quality set with the most frequently used chisels: tube chisel, flat chisel, pointed chisel, anvil chisel and finishing chisel. Neatly packed in a wooden box. |
|
|
 |
|
|
|
|
|
| 27028 Drill Chuck w/sleeve for DB250 |
$17.95
|
|
|
|
|
|
|
|
|
|
|
Drill chuck with sliding sleeve for the tailstock of the DB 250
Clamps up to 5.0 mm. Is inserted on the spot of the rotating back centre. The feed movement results from sliding the complete tailstock. |
|
 |
|
|
|
|
|
| 27024 Four Jaw Chuck for DB250 |
$35.95
|
|
|
|
|
|
|
|
|
Independent Four Jaw Chuck for DB 250
Used to clamp asymmetrical pieces such as rectangles. The reversible jaws clamp from 0 to 1 3/8" (0 to 35 mm) inside and 35/64" to 2 5/8" (14 to 67 mm) outside. The DB 250 headstock spindle of thread M16 x 1 screws directly into the chuck. |
|
|
 |
|
|
|
|
|
| 27026 Three Jaw Chuck for DB250 |
$52.95
|
|
|
|
|
|
|
|
Three Jaw Chuck for DB 250
Used for concentric clamping. Made from zinc diecast and offering 1/16" to 1 13/32" (1.5 to 32 mm) and 1/2" to 2 19/32" (12 to 65 mm) when reversing the jaws. The chuck has a M16 x 1 thread for fitting directly to the DB 250 spindle. |
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
