Proxxon Tools: Micro Screwdriver MIS 1

28690 Micro Screwdriver MIS 1

$83.95

Included:

Micro screwdriver
16 insert driver bits

Note: For operating this unit we recommend PROXXON MICROMOT power supplies NG 2/S or NG 5/E.

With torque adjustable from 0.35 - 2.0 Nm. Quiet, light and with sensitive clutch. Used in electronic assembly lines, machine assembly and by model builders and clock makers.

The three stage planetary gearbox offers a reduction ration of 93:1, yielding the ideal speed of 200 - 250 rpm (depending on mains adapter used). The clutch is adjustable in the range 3 in-lbs to 9 in-lbs in 5 steps. Tightening torques can be selected precisely. The six stage bypasses the clutch and yields approx. 18 in-lbs. An ideally positioned rocker switch provides on/off/reverse. Fibreglass reinforced NYLON lends high impact resistance to the housing. A Roehm chuck facilitates acceptance of all bit shanks, including 1/4". A 79" flexible cord ensures perfect mobility. The tool operates of 12-16v DC The rear mounted metal hook is used with the optional balancer.

The screw driver comes with 16 bits (Chrome Molybdenum) in a cardboard box. Weight 375 g. Overall length: 150 mm. We recommend the use of MICROMOT NG 2/S or NG 5/E power supplies.

Suggestions for industrial use:

This screw driver MIS 1 is the ideal tool for torques up to 18 in-lbs. It is perferred over the compressed air types because of less costly running expenses, but also for its quietness and cleanliness. The highly flexible spiral cable makes it easy to use.